IKRCC Home

 

 

THE FOLLOWING JOURNEYMAN ENHANCEMENT CLASSES ARE BEING HELD
AT THE HOBART CAMPUS

Please register for Hobart Campus classes by calling:

219-947-3348 or toll free 877-500-4227

Weekday classes are – 5:00p.m. – 9:00 p.m.
Saturday Classes – 7:00a.m. – 3:30 p.m.
UNLESS OTHERWISE NOTED

 

 

Carpenter's and Millwright Schedule

Apprenticeship Training Definitions

Concrete Forms - Limit 8, 16 hrs

February 11 - 14, 2008

Fork Lift - Limit 10, 8 hrs

February 11 & 12, 2008
February 13 & 14, 2008

Metal Studs & Drywall - Limit 10, 16 hrs

February 18 - 21, 2008
April 14 - 17, 2008

Rigging - Limit 10, 32 hrs

February 18 - 21, 2008 ( 7:30am - 4:00pm )
April 7 - 10, 2008 ( 7:30am - 4:00pm )
June 16 - 19, 2008 ( 7:30am - 4:00pm )

Welding - Limit 10, 20 hrs

February 25 - 29, 2008
March 24 - 28, 2008
April 21 - 25, 2008
May 19 - 23, 2008
June 9 - 13, 2008

Basic Computers - Limit 12, 3 hrs

February 28, 2008 (5:30pm - 8:30pm)

Door Hardware I - Limit 6, 24 hrs

March 3 - 6 & 8, 2008

Vinyl Siding - Limit 8, 20 hrs

March 3 - 7, 2008

Aerial Lift - Limit 10, 8 hrs

March 3 & 4, 2008
March 5 & 6, 2008
March 10, 2008
May 27, 2008 (7:30am - 4:00pm)
May 28, 2008 (7:30am - 4:00pm)
May 31, 2008

Rafters I - Limit 12, 16 hrs
(Common Rafters, Balloon Walls)

March 10 - 13, 2008

Turbine Familiarization and Hytorc - Limit 10, 24 hrs

March 11 - 13, 2008 (7:30am - 4:00pm)
May 12 - 14, 2008 (7:30am - 4:00pm)

Ceiling Grid - Limit 10, 16 hrs

March 17 - 20, 2008
March 31 - April 3, 2008

Millwright Machinery Alignment - Limit 6, 12 hrs

March 17 - 19, 2008

Millwright Laser Alignment - Limit 6, 12 hrs

March 24 - 26, 2008

Intro to Microsoft Word - Limit 12, 3 hrs

March 27, 2008 (5:30pm - 8:30pm)

Rafters II - Limit 12, 16 hrs
(Hip and Intersecting Roofs)

March 31 - April 3, 2008

Door Hardware II - Limit 6, 24 hrs

March 31 - April 3 & 5, 2008
April 28 - May 1 & 3, 2008

Solid Surface - Limit 8, 16 hrs

April 8, 10 & 12, 2008

Rafters III - Limit 12, 16 hrs
(Multi-pitched roofs, octagonal/hexagonal roofs)

April 14 - 17, 2008

Intro to Excel - Limit 12, 3 hrs

April 21, 2008 (5:30pm - 8:30pm)

All Terrain Vehicle - Limit 10, 8 hrs

April 26, 2008 (7:30am - 4:00pm)
June 14, 2008 (7:30am - 4:00pm)

Toilet Partitions - Limit 4, 12 hrs

May 5 - 7, 2008

Intro to PowerPoint - Limit 12, 3 hrs

May 5, 2008 (5:30pm - 8:30pm)

Stairs I - Limit 12, 12 hrs

May 5 - 7, 2008

First Aid, CPR & AED - Limit 9, 20 hrs

May 12 - 16, 2008

Door Hardware Certifications - Limit 6, 24 hrs
(Prerequisite Door Hardware I & II)

May 12 - 15 & 17, 2008

Level/Transit - Limit 8, 16 hrs

June 2 - 5, 2008

 

The following classes will be run on an as needed basis:

32-Hour Scaffolding
8-Hour Scaffold Refresher
OSHA 10 hour
M/W 16 hour

Special Note to All Millrights
Prerequisites for Training in Las Vegas

Steam and Gas Turbine Certification

Millwright 16

16 Hours

Rigging

32 Hours

Turbine Familiarization/Hytorc

24 Hours

 

Conveyor Qualification

Rigging

32 Hours

Fork Lift

8 Hours

Aerial Lift

8 Hours

NOTE: ALL PREREQUISITES MUST BE CERTIFIED THROUGH THE UBC.

 

Hobart Campus

Training Home